6x7 Stainless Steel Wire Rope, EN 12385

Product category

Chain
1.Stainless Steel Chain
2.Animal Chain
3.Weldless Chain
4.Welded Link Chain
5.Plastic Chain
6.Chain Sling
Wire Rope
1.Steel Wire Rope
2.Line Contacted Wire Rope
3.No-rotating Steel Wire Rope
4.Elevator Steel Wire Rope
5.Compacted Wire Rope
6.Triangular Wire Rope
7.PVC Coated Wire Rope
8.Stainless Steel Wire Rope
9.Aircraft Cord
10.Guy Rope
11.Steel Wire
12.Steel Series
13.Wire Rope Sling
Rigging Hardware
1.Spelter Socket
2.Solid Brass Product
3.Swivel
4.Quick Link
5.Snap Hook
6.Hook & Link
7.Load Binders
8.Bolt & Nut
9.Wire Rope Thimble
10.Wire Rope Clip
11.Turnbuckle
12.Shackle
13.G80 Products
14.G100 Products
15.Clips & Rings
Marine Hardware
1.Accessories
2.Anchor Chain
3.Anchor
Lifting & Hoist Products
1.Lifting Clamp & Trolley
2.Lifting Hoist
3.Block & Pulley
4.Synthetic Bridle Sling
5.Round Sling
6.Webbing Sling
Cargo Control & Transport Products
1.Cargo Control Product
2.Ratchet Buckle & End Fitting
3.Ratchet Tie Down

6x7 Stainless Steel Wire Rope, EN 12385
Type：Wire Rope - Stainless Steel Wire Rope

6x7 Stainless Steel Wire Rope, EN 12385

AISI304 or AISI316

Nominal
Diameter
mm Approx. Weight
kg/100m Nominal Tensile
Strength N/mm² Minimum Breaking
Strength KN

FC IWS FC IWS

0.8 - 0.26 1770 - 0.41

1.0 - 0.40 1770 - 0.64

1.5 - 0.91 1770 - 1.43

2.0 1.47 1.62 1770 2.35 2.54

2.5 2.30 2.53 1770 3.67 3.97

3.0 3.31 3.64 1770 5.29 5.71

4.0 5.88 6.48 1570 8.34 9.01

5.0 9.19 10.12 1570 13.00 14.10

6.0 13.20 14.60 1570 18.80 20.30

7.0 18.00 19.80 1570 25.50 27.60

8.0 23.50 25.90 1570 33.40 36.10

9.0 29.80 32.80 1570 42.20 45.60

10.0 36.80 40.50 1570 52.20 56.30

11.0 44.50 49.00 1570 63.10 68.20

12.0 53.00 58.30 1570 75.10 81.10

◇Prev：Ordinary Mild Steel Link Chain, Short Link Chain, Chain, Short Chain, Galvanized Chain, Mild chain
◇Next：6x19 Stainless Steel Wire Rope, EN 12385

【6x7 Stainless Steel Wire Rope, EN 12385】

6x7 Stainless Steel Wire Rope, EN 12385
AISI304 or AISI316

Nominal Diameter mm	Approx. Weight kg/100m		Nominal Tensile Strength N/mm²	Minimum Breaking Strength KN
Nominal Diameter mm	FC	IWS	Nominal Tensile Strength N/mm²	FC	IWS
0.8	-	0.26	1770	-	0.41
1.0	-	0.40	1770	-	0.64
1.5	-	0.91	1770	-	1.43
2.0	1.47	1.62	1770	2.35	2.54
2.5	2.30	2.53	1770	3.67	3.97
3.0	3.31	3.64	1770	5.29	5.71
4.0	5.88	6.48	1570	8.34	9.01
5.0	9.19	10.12	1570	13.00	14.10
6.0	13.20	14.60	1570	18.80	20.30
7.0	18.00	19.80	1570	25.50	27.60
8.0	23.50	25.90	1570	33.40	36.10
9.0	29.80	32.80	1570	42.20	45.60
10.0	36.80	40.50	1570	52.20	56.30
11.0	44.50	49.00	1570	63.10	68.20
12.0	53.00	58.30	1570	75.10	81.10